Adding The Geographical Position To Your Photos; General Camera Settings - Sony C6902 User Manual

To take a photo using Smile Shutter™
1 When the camera is open and Smile Shutter™ is turned on, point the camera
at your subject. The camera selects which face to focus on.
2 The face selected appears inside a coloured frame and the photo is taken
automatically.
3
If no smile is detected, press the camera key to take the photo manually.

Adding the geographical position to your photos

Turn on geotagging to add the approximate geographical location (a geotag) to
photos when you take them. The geographical location is determined either by
wireless networks (mobile or Wi-Fi® networks) or GPS technology.
When appears on the camera screen, geotagging is turned on but the
geographical position has not been found. When
and the geographical location is available, so your photo can get geotagged. When
neither of these two symbols appears, geotagging is turned off.
To turn on geotagging
1 From your Home screen, tap
2
Tap Settings > Location services.
3 Drag the slider beside Access to my location to the right.
4 Activate the camera.
5 Tap , then tap .
6 Drag the slider beside Geotagging to the right.
7 Tap OK.

General camera settings

Capturing mode settings overview
Superior auto
Optimise your settings to suit any scene.
Manual
Adjust camera settings manually.
Timeshift burst
Shift back and forth in time to enjoy and share your favourite moments.
Picture effect
Apply effects to photos.
AR effect
Take photos with virtual scenes and characters.
Find more information about what you see in the viewfinder.
Social live
Broadcast live video to Facebook™.
Sweep Panorama
Use this setting to take wide-angle, panoramic photos. Just press the camera key and move the
camera steadily from one side to the other.
Quick launch
Use Quick launch settings to launch the camera when the screen is locked.
Launch only
When this setting is activated, you can launch the camera when the screen is locked by pressing and
holding down the camera key.
Launch and capture
When this setting is activated, you can launch the camera and capture a photo automatically when the
screen is locked by pressing and holding down the camera key.
Launch and record video
This is an Internet version of this publication. © Print only for private use.
appears, geotagging is turned on
.
71