Seat Belts-Shoulder Belt Anchor; Tire Pressure Monitoring (Warning) System - Toyota Avalon Quick Reference Manual

SAFETY AND EMERGENCY FEATURES

Seat belts-Shoulder belt anchor

Tire Pressure Monitoring (warning)
System
After adjusting tire pressures, or after tires have been rotated or replaced, turn
the "ENGINE START STOP" switch to IGNITION ON mode and press and hold the
" SET" button until indicator blinks three times. Let the vehicle sit for a few
minutes to allow initialization to complete.
Refer to the load label on the door jamb or the Owner's Manual for tire inflation
specifications.
If the tire pressure indicator flashes for more than 60 seconds and then remains
on, take the vehicle to your local Toyota dealer.
NOTE: The warning light may come on due to temperature changes or changes
in tire pressure from natural air leakage. If the system has not been initialized
recently, setting the tire pressures to factory specifications should turn off the light.
Push up, or squeeze
lock release to lower
System reset initialization
1. Push and hold "
the indicator blinks three times.
2. Wait a few minutes to allow
initialization to complete.
24
SET" button until