Table of Contents
Advertisement
Nav Flag:
(Pins 3 and 4)
OBI data:
(Pins 7, 8, and 23)
Message
annunciators:
(Pin 20)
RS232 chan 1 output data: Output capable of driving ARGUS3000/5000/7000,
(Pin 24)
RS232 chan 2 output data: Output capable of driving real-time plotting interface
(Pin 19)
RS232 chan 1 input data: Input capable of receiving serial altitude data from
(Pin 17)
Arrival alarm annunciator: Output capable of driving negative logic annunciator
(Pin 12)
ARINC 429 Output A & B: Output capable of interfacing with any device that has
(Pins 15 and 16)
NAV Super Flag Output:
(Pin 10)
Av. Kit Install. Manual
190-00026-00 Rev. Q
Page 6
Capable of driving up to three 1000 ohm parallel
loads, 375 millivolts for flag out-of-view, and
+40 millivolts for flag in-view.
Output providing bearing to waypoint data for a
Bendix/King RMI (KI 229 or equivalent).
Output capable of driving negative logic message
annunciators by sinking up to 500mA.
STORMSCOPE SERIES II with NAVAID moving
map displays, Shadin 91204X[T]/91053X[T],
Electronics International FP-5L fuel flow systems, or
Shadin 962801 Fuel/Airdata Computer.
the EIA specification RS-232C.
on GARMIN PC software or NMEA 0183 version 2.0
compatible mapping device.
specification RS-232C.
either an ICARUS Instruments 3000, Shadin Company
(formerly Rosetta MicroAvionics) 8800T, 9000T, or
9200T series altitude serializer/encoder, Shadin
91204XT/91053XT Series Fuel management system,
Arnav FC-10/FT-10 fuel computer/totalizer,
Electronics International FP-5L fuel flow system, or
Shadin 962801 Fuel/Airdata Computer.
the EIA specification RS-232C.
by sinking up to 500mA.
an input conforming to the GAMA ARINC 429
specification.
Output capable of driving positive logic NAV Super
Flag by sourcing up to 500mA for flag out of view (NAV
valid).
Conforms to
Conforms to the EIA
Conforms to
Advertisement
Table of Contents
