Install The Battery - Garmin GPS 10x Setup

Contents of Your GPS 10x Package
GPS 10x GPS receiver with Bluetooth
Lithium-ion battery
Belt clip that makes your GPS 10x receiver completely portable
Power adapter cable to power and charge the GPS 10x receiver in
your vehicle
Note: Mobile device refers to the electronic device with
Bluetooth wireless technology that you will be using for
®
navigation. A mobile device can be a laptop or notebook computer,
or a handheld device or mobile phone with Windows Mobile
software, Symbian

Install the Battery

➊
1. Locate the black or gray lithium-ion battery.
2. With your thumbnail, pull the release tab toward the edge of the
case. Remove the battery cover.
3. Locate the metal contacts on one end of the battery. Insert the
battery so the metal contacts match up with the metal contacts
inside the battery compartment. Press the battery down into
place.
4. Replace the battery cover by inserting the tabs into the notches.
Press the door closed; the release tab locks the cover in place.
wireless technology
®
software, or Palm OS software.
™ ®
Power
button
Power LED
Mini-USB connector
for Power cable
Battery
cover
Bluetooth LED
Release
tab
Lithium-ion
battery