Custom Led Lights; Free Arm; Thread Cutter; Electronic Knee-Lift - Pfaff IEC/EN 60335-2-28 Owner's Manual

Custom LED lights

Your machine has LED lights which distribute the
light evenly over the sewing area and eliminates
shadows. You can adjust the intensity and color
temperature of the light in the Settings menu, see
chapter 3.

Free arm

To use the free arm, slide off the accessory tray.
When attached, a hook keeps the accessory tray
locked to the machine. Remove the tray by sliding it
to the left.

Thread cutter

To use the thread cutter, pull the thread from back
to front as shown.

Electronic knee-lift

Your machine comes with an electronic knee-lift for
regulating the presser foot height.
Insert the knee-lift in the provided hole on the
machine. The at side must face upwards. Adjust
the rectangular bar on the knee-lift until it is
positioned at a comfortable height for you (A).
If you press the knee-lift to the right, the presser
A
foot will raise. You can now guide the fabric with
both hands.
To remove the knee-lift, just pull it straight out of
the hole.
2:3