Advertisement
DAILY TIMER SETTING
DAILY TIMER SETTING
• To turn ON or OFF the unit at a preset time.
1 • Press once to change the
TIMER/CLOCK
MODE
UP
SELECT
OFF/ON
DOWN
SET
CLOCK
CANCEL
3 Set the time
2 Select ON or
OFF timer
4 Confi rm
• To cancel ON or OFF timer, press
• Timer operation is based on the clock set in the
remote control and repeats daily once set.
• The timer closest to the current time will be activated
fi rst.
• If timer is cancelled manually or due to power failure,
you can restore the previous setting by pressing
WEEKLY TIMER SETTING
WEEKLY TIMER SETTING
• Daily timer and weekly timer could not be set at the
same time.
• Promotes energy saving by allowing you to set up to
6 programs in any given day.
MODE
1. Press Timer
for 4 seconds to change display to
weekly timer.
UP
DOWN
2. Press Timer
or
SELECT
3. Press
to confi rm your selection.
4. "1" will be blinking, press
OFF/ON
5. Press Timer
to select ON or OFF timer.
UP
DOWN
6. Press Timer
or
If you want to set the timer together with your desired
temperature, press
TEMP
SET
7. Press
to confi rm program 1. The selected day will
be highlighted with
• After 2 seconds, the display will move to the next
program. Repeat steps 4 to 7 to set programs 2 to 6.
• Same timer program cannot be set in the same day.
• During timer setup, if no button is pressed within 30
SET
seconds, or if the
button is pressed, the setting at
that moment is confi rmed and timer setup is ended.
F568357-SS1011-0_EN.indd 3
F568357-SS1011-0_EN.indd 3
display from Clock to Timer
or vice-versa.
• Press for more than 4
seconds to change the
display from Daily Timer to
Weekly Timer or vice-versa.
CANCEL
.
SET
.
to select your desired day.
SELECT
to set program 1.
to select your desired time.
to select the temperature.
.
PANTONE 293 C
PANTONE 293 C
OPERATION DETAILS
OPERATION DETAILS
The timer setting will shown at wired remote control
only but not at indoor unit's TIMER indicator.
Check Current Timer Program
Perform the step below to check the timer program for
a particular day.
MODE
1. Press Timer
to enter timer mode.
SELECT
2. Press
to enter day setting.
UP
DOWN
3. Press Timer
or
until your desired day is
SELECT
shown, press
to confi rm your selection.
UP
DOWN
4. Press Timer
or
to check the set programs.
Modify Current Timer Program or Add New Timer
Program
MODE
1. Press Timer
to enter timer mode.
SELECT
2. Press
to enter day setting.
UP
DOWN
3. Press Timer
or
until your desired day is
shown.
4. Perform steps 4 to 7 of "WEEKLY TIMER SETTING"
to modify existing timer program, or add any timer
program.
Cancel Current Timer Program
Perform the step below to cancel the timer program for
a particular day.
SELECT
1. Press
to enter day.
UP
DOWN
2. Press Timer
or
until your desired day is
shown.
SELECT
3. Press
to enter program setting.
UP
DOWN
4. Press Timer
or
until your desired program is
shown.
CANCEL
Press
to cancel the program,
disappear.
Disable & Enable Weekly Timer
• To disable weekly timer setting, press
CANCEL
press
.
• To enable previous weekly timer setting, press
SET
then press
.
NOTE
NOTE
• POWERFUL, QUIET operation setting could be
operate according to wireless remote control.
• When wired remote control is in operation, the timer
setting from wireless remote control will be cancelled.
will
MODE
, then
MODE
,
3
10/17/2011 12:42:01 PM
10/17/2011 12:42:01 PM
Advertisement
