Jabra GN1220 Quick Manual

Simple connectivity.
Convenient Noise-at-work compliance.
The Jabra GN1220 is a cord offering inexpensive connectivity to a wealth of telephone systems and no nonsense,
hassle-free compliance with the latest in EU noise regulations. The Jabra GN1220 is part of the Jabra GN1200 Series
and builds on the same intuitive-to-use design.
• Makes our most popular corded headsets compliant with EU Noise-at-work directive (EN 2003/10/EC)*
• Works with most desk phones including IP hard phones
• Microphone amplification when required
• Simple 8-position slide adjustment means no need for a user manual (QD to RJ9 variant only)
Aside from complying with noise-at-work regulation the Jabra GN1220 is the answer to a common issue. When
hooking up a new headset there is not always a dial tone. The problem could be the headset or the telephone?
But chances are it is the cord. Even though the headset and telephone may be plug-compatible, the wiring is
determined by the individual telephone manufacturer.
The Jabra GN1220 (QD to RJ9) features eight separate wire configurations - including three with built-in
microphone amplification. Simply connect the Jabra GN1220 and headset through the QD (Quick Disconnect)
plug and flick the slide from one position to the next until a dial tone is heard. It's as simple as that! Noise-at-work
compliance has never been more convenient.
Jabra GN1220 is available in two variants to fit almost any need:
• QD to RJ9 with straight cord
- for connecting most telephones on the market to our most popular headsets
• QD to QD with straight cord
- designed for GN Ellipse (when used with GN2000, GN2100 and GN2200)
GN1220 GN1220