Updating The C320 Software And Map Data; Resetting Your C320 - Garmin StreetPilot c320 Owner's Manual

A
PPENDIX

Updating the c320 Software and Map Data

Garmin periodically updates its software and map data. If you register your unit, you will receive
notification of software and map updates.
Check the Garmin Web site at
map software is available. Also check
Updates link to see if an update to the c320's internal software is available.
See page 17 for instructions on how to find your current MapSource software and version number.

Resetting Your c320

If your unit locks up, press the Power button to turn off the unit, then press again to turn the unit back
on. If this does not help, reset your c320.
To reset the c320:
1. Place your thumb nail in the groove located
under the Garmin logo on the face plate.
2. Gently pull off the face plate.
3. Press the Reset button.
4. Turn the unit back on; it will operate
normally.
Garmin © 2005
http://www.garmin.com/unlock/update.jsp
http://www.garmin.com/products/sp320/
Face plate
28
to see if an update for your
and select the Software
Reset button
Power button
c320 Owner's Manual