Programmed Heating; Programming Number/Memory Pads - Panasonic NE-2156-2 Operating Instructions Manual

B. PROGRAMMED HEATING
In Program Unlock Mode:
Example: To select Number/Memory pad "3" at A side in which your desired heating program (at HIGH
power for 3 min., single stage heating) is set
PAD
1
Open the door and put the food in the oven.
The oven lamp will turn on and "0" will appear.
Note: While "0" appears, operation is available. One minute after the door
2
Press the desired Number/Memory pad "3".
3
The currently programmed information will be indicated.
3
Press Start pad.
The oven lamp will turn on and heating will start. The heating time will
count down.
• When all time expires, beep tone will sound and heating will stop. The oven lamp will
turn off. "0" will blink until the door is opened. One minute later, cooling fan will stop.
• Open the door and take the food out. The oven lamp will turn on.
• Close the door. The oven lamp will turn off. One minute later, Digital Display Window will
go blank.
Note:
• When you want to select the number at B side, press Shift (A/B) pad before pressing the desired
Number/Memory pad.
In Program Lock Mode:
Just press the desired Number/Memory pad. Heating will automatically start without pressing Start pad.
For Double (or Treble) Quantity heating:
Press Double (or Treble) Quantity pad before pressing the desired Number/Memory pad.
C. PROGRAMMING NUMBER/MEMORY PADS –– single stage heating ––
THE OVEN CAN NOT BE PROGRAMMED WHEN PROGRAM LOCK IS ACTIVATED! (see page 9-10)
DO NOT OPEN THE DOOR WHILE PROGRAMMING!
Example: To program cooking at DEFROST power for 1 minute into Number/Memory pad "5"
PAD
1
Keep the door closed.
Digital Display Window must be blank.
2
Press Program pad.
"PROG" will start to blink.
How to Operate
INSTRUCTION
is closed, "0" will disappear.
INSTRUCTION
NE-2156-2/NE-1656
- 7 -
DIGITAL DISPLAY WINDOW
PROG
1
PROG
1
DIGITAL DISPLAY WINDOW
PROG