Watching Channels From An External Device; Changing Picture And Sound Settings; Sleep Timer; Freeze Mode - Magnavox 32ME303V Owner's Manual

Watching channels from an external device

Switching Each Input Mode can easily switch with the remote control
between TV (DTV or Analog TV) and external devices when they are
connected to the unit.
1
Turn On a Set-top box or a connected device.
• The picture from the Set-top box or the connected device might
appear automatically on the TV screen.
If the picture does not appear
Press SOURCE repeatedly to select the Set-top box or the
connected device and wait a few seconds till the Picture appears.
e.g.)
11.1
Source
TV DTV / Analog TV
channel
HDMI1
HDMI2
HDMI3
Video
PC
PC
• Pressing ▲ reverses the direction of the Input modes.
2
Use the Remote Control of the Set-top box or the connected
device to select Channels.

Changing picture and sound settings

1
Press PIC/SOUND MODE to set your TV to a predefined picture
and sound setting.
50" - 39"
2
Use ▲▼to select one of the following settings :
Auto picture Auto sound
Personal
Standard
Vivid
Sports
Movie
Game –
Eco –
– Music
– News
HDMI1 HDMI2
Video
HDMI3
or
Component
32" - 24"
Description
The customized settings you defined using
the Picture and Sound menu
For normal TV viewing
Enhanced picture contrast, sharpness and
sound for viewing in a well-lit room
Brilliant picture settings and clear sound for
high action
Deep picture and powerful sound settings
for a cinematic experience
Optimized for PCs and game consoles
Eco TV settings for low power
consumption
Optimized for music playback
Controls picture tone and set the anchor's
voice at a comfortable volume

Sleep timer

Sleep Timer can set the unit to go into Standby mode after an
incremental period of time.
50" - 39"
Press SLEEP repeatedly to change the amount of
time (increases the time by 30 minutes up to 120
minutes).
Press SLEEP once to call up the display for checking the remaining time.
To cancel sleep timer, press SLEEP repeatedly until Off is displayed.
•

Freeze mode

(32ME303V / 32ME403V / 29ME403V / 24ME403V only)
Freeze Mode can freeze the image shown on the TV screen
for 5 minutes.
Press FREEZE to freeze the image.
• The sound Output will not be paused.
• To cancel freeze mode, press any buttons except

Switching audio mode

50" - 39"
Digital TV operation
1
Press SAP to display the currently selected language
and the number of available languages.
2
Press SAP repeatedly to cycle through the available
Audio languages.
Note
• Available languages differ depending on the broadcast.
• Other is displayed when the audio language cannot be acquired or the acquired
languages are other than English, French or Spanish.
Analog/Cable TV operation
1
Press SAP to display the currently selected Audio mode.
2
While receiving an MTS broadcast, press repeatedly
to cycle through the available Audio Channels.
e.g.) When all audio are available
SAP/STEREO SAP/MONO
STEREO : Outputs stereo-audio
SAP : Outputs second audio program
MONO :
Outputs mono-audio
18
English
32" - 24"
Sleep 120min.
Freeze
.
32" - 24"
11.1
English 1/3
11
SAP / STEREO
SAP/STEREO