Table of Contents
Advertisement
WD Drive Utilities provides two ways to erase your drive, depending on whether it is locked or
not:
IF your drive is . . .
Not locked,
Locked
Using the Drive Erase Function
To erase your
drive when it
1.
Open the WD Drive Utilities software by clicking either:
•
The WD Drive Utilities desktop shortcut icon if you created one when you
installed the application
•
Start > (All) Programs > Western Digital > WD Apps > WD Drive Utilities
See Figure 4 on page 8.
2. If you have more than one supported drive connected to your computer, select the
one that you want to erase.
3. Click Drive Erase to display the Drive Erase dialog:
4. On the Drive Erase dialog:
a. Read the warning about the loss of data if you erase your drive.
b. Click the I understand check box to signify that you accept the risk.
c. Click Erase Drive.
After the drive erase operation completes, go to
Knowledge Base answer ID 7 for information about downloading and restoring the WD
software and disk image on your My Passport drive.
Note: Erasing your drive also removes your password. If you used a password to
protect your drive, you will need to re-create it after restoring the
software and disk image
page 43.)
AND you . . .
Want to erase the drive,
Have forgotten or lost your
password and must erase the
drive,
is not locked:
. (See "Password Protecting the Drive" on
THEN see . . .
"Using the Drive Erase Function"
in the next section.
"Using the WD Drive Unlock
Utility" on page 56
http://support.wd.com
MANAGING AND CUSTOMIZING THE DRIVE – 55
MY PASSPORT SLIM
USER MANUAL
and see
WD
Advertisement
Table of Contents
