Samsung 726-7864 User Manual page 66

Food does not broil The oven controls have been set • Press the BROIL pad.
properly, incorrectly.
The rack has not been properly • See the broiling guide on page 43.
positioned.
Cookware not suited for broiling. • Use suitable cookware.
In some areas the power (voltage) • Preheat the broil element for 10 minutes.
may be low.
• See the broiling guide on page 43.
The oven The oven sensor needs to be • See the section on adjusting the
temperature is too adjusted, thermostat on page 49.
hot or too col d.
Scratches or The cooktop is being cleaned •
abrasions on improperly.
cooktop surface.
®
Cookware with rough bottoms was
used on the cooktop or there were
coarse particles (eg. salt or sand)
_resent between the cookware
and the surface of the cooktop.
Cookware has been slid across the
cooktop surface.
Boilovers have been cooked onto
the surface.
Scratches are not removable. Tiny
scratches will become less visible in time
as a result of cleaning.
To avoid scratches, use the recommended
cleaning procedures. Make sure the bottoms
of cookware are clean before use and use
cookware with smooth bottoms.
Brown streaks or • Use the blade scraper to remove soil.
specks.
• See the section ors the care and cleaning
of the glass cooktop on page 58.
Areas of Mineral deposits from water and • Remove using a ceramic-glass cooktop
discoloration with food have been left on the surface cleaning cream.
metallic sheen, of the cooktop.
• Use cookware with clean, dry bottoms.
The oven will not The oven temperature is too high • Allow the range to cool and reset the
self-clean, to start a self-clean operation, controls.
The oven controls have been set • See the section on self-cleaning on page
incorrectly. 53.
You cannot start a self-cleaning cycle if you have activated the oven lockout
feature or if a radiant surface element is on.
"Crackling" or This is the sound of the metal • This is normal.
"popping" sound, heating and cooling during
both the cooking and cleaning
functions.
E×cessive smoke There is excessive soiling in the
during a self_ oven.
cleaning Cycle'
The oven door will The overs is too hot.
shotopen after a
elf=cleaning cycle:
Oven not clean The overs controls were not set
after a self-cleaning correctly.
cycle, The oven was heavily soiled.
• Press the CLEAR/OFF pad. Open the
windows to rid the room of smoke. Wait
until the self-cleaning cycle is cancelled.
Wipe up the excessive soil and reset the
oven for self-cleaning.
• Allow the oven to cool.
• See the section on self-cleaning on page
53.
• Wipe up heavy spillovers before starting
the self-cleaning cycle. Heavily soiled
ovens may need to self-clean again or for
a longer period of time.