Quick Reference - Sharp LC-60LE550U, LC-70LE550U Operation Manual

QUICK REFERENCE
o Before attaching the stand, make sure to turn off the TV
and unphJg the AC cord.
o Before performing work spread cushioning over the base
area to lay the TV on. This will prevent it from being
damaged.
o Attach the stand in the correct direction.
o Do not remove the stand from the TV unless using an
optionam wall mount bracket to mount it.
o Be sure to follow the instructions. Incorrect installation
of the stand may result in the TV falling over.
o After attaching the stand to the TV, do not hold the
stand when you put up, set up, move or lay down the TV.
1 Confirm that there are 12 screws (8 long screws
and 4 short screws) supplied with the stand unit.
2 @ Set the post for the stand unit onto the
polystyrene foam.
Attach the base to the post.
Insert and tighten the 8 screws into the 8 holes
on the bottom of the base.
o Hold the stand unit securely with one hand, and then
tighten the screws.
[] LC-70LE550U
®
,_ Long
screw_
3 _ Insert the stand into the openings on the bottom
of the TV.
o Make sure that the stand is limply inserted into the
TV. Improper installation may result in tilting of the
TV set.
Insert and tighten the 4 screws into the 4 holes
on the rear of the TV.
o Before detaching the stand, make sure to turn off the TV
and unplug the AC cord.
o Do not remove the stand from the TV unless using an
optional wall mount bracket to mount it.
1 Unfasten the four screws used to secure the stand
in place.
@
[] LC-60LE550U
®
2 Detach the stand from the TV.
ft
® j¢<1 _
o In the installation procedure, be careful not to catch your
fingers between the TV set and the floor.
7