Auto Power Link - Samsung HW-F550 User Manual

Using the AUTO POWER LiNK function
The Crystal SurroundAir Track is automaticallyturned on when you turn on the
TVor any device connected to the Air Track with the optical cable.
PressAUTO POWER on the remote control of this unit.
,, The Auto power linkfunction turns on and off each time you press AUTO
POWER.
AUTO POWER LINK Display .....................
_ POWERLINKON
,_ If a TV or any device connected to Air Track with the optical cable is
off and there is no digital input, the Air Track is turned off after 20
minutes.
,_ These functions are available only when Anynet+ (HDMI-CEC) is
turned off.
Using the AUDIO SYNC function
Video may appear out of synch with the audio if the Air Track isconnected to a
digital T_. Ifthis occurs, adjust the audio delay time to match the video.
PressAUDIO SYNC +!-. on the remote control of this unit.
,, You can use the +, - buttons to set the audio delay time between 0 ms
and 300 ms.
_*In USB mode, TV mode or BT mode, the Audio Sync function may
not work.
Using the DRC function
This feature balances the range between the loudest and quietest sounds.
You can use this function to enjoy Dolby Digital sound when watching movies
at low volume at night.
Press DRC on the remote control of this unit.
,, Each time the button is pressed, the selection changes as follows '
DRC STANDARD _ DRC MAX _ DRC MIN
SPEAKER button
If the TV and Air Track are connected via HDMI, this button lets you select
between listening to audio through your TV or through the Air Track.
PressSPEAKER on the remote control of this unit.
AUDIO MODE
HDMI IN
ARC
SPEAKER scroll Display i Display
TV TVSPEAKER TV SPK
Air Track AVRSPEAKER HDMI
TV TVSPEAKER S MUTE
Air Track AVRSPEAKER TVARC
21