Accessing And Navigating Menus - Bosch AutoDome VG4-100 Series User Manual

6 en | Advanced Setup
5.1

Accessing and Navigating Menus

There are five (5) keys used for navigating through the various menus. To access the setup
menus, press the center Select key to open and display the Main menu. Use the four direc-
tional keys to navigate through the menus.
SELECT
Fig. 5.1 Menu Keyboard and Monitor Jack
Use the menu keys to perform the following:
–
–
–
–
NOTICE! To restore a selected menu item to its factory default, quickly press the Menu
i
Select key twice.
To exit the OSD menus from any menu item, hold down the Menu Select key until the OSD
disappears.
The VG4-100 Series also supports a variety of remote methods to make camera adjustments,
including the following:
–
–
–
NOTICE! To prevent unauthorized changes to the camera settings, the camera menu buttons
i
can be disabled using Bilinx communication through the CTFID software. Select the OnLine
Config button, then select the Miscellaneous branch and set Camera Buttons to Disable.
F01U028033 | 1.0 | 2006.08
UP
LEFT RIGHT
DOWN
Menu Keyboard
Menu Keyboard
To access the Main menu or to select a sub-menu item, press the center Menu Select
key.
To open the Install menu press the Menu Select key for approximately 1.5 seconds.
To scroll up or down a menu press the Up or Down keys.
To move through options or to set parameters, press the Left or Right keys.
A Universal keyboard using Bilinx over coax or UTP. For example, using a Bosch DiBos 8,
a Bilinx capable DIVAR, or an Allegiant system.
A PC running the optional Bosch Configuration Tool for Imaging Devices (CTFID) software
with a USB Bilinx adapter (Part No. VP-CFGSFT).
A PC connected to a TCP/IP network with an optional AutoDome IP module installed.
VG4-100 Series User's Manual
AutoDome Modular Camera System
Monitor Jack
Monitor Jack
Bosch Security Systems, Inc.