Starting Pole Trimmer; Adjusting Pole Length - Remington Axcess Trimmer RM3017HP Owner's Manual

OPERATING POLE TRIMMER
/,
Figure 6 - Extension Cord Loop Tight
Around Molded Cord Hook
Note: An optional
method of retaining the
extension cord is shown in Figure 7 for use
with larger-gage cords that may not fit into
the extension cord retainer.
<
Trigger Lock Button
Position 2
Figure 8- Manually Operating Triggerwith
TrLgger Lock Button in Position 2
2.
Release the trigger lock button while the
Pole Trimmer is running. The lock button
resets to Position 1 each time you release
the trigger to the OFF position.
Trigger Lock
Button Position
1
ADJUSTING POLE LENGTH
The Remington brand Pole Trimmer has a
telescoping pole assembly that has an ex-
tendable range of 10 inches. A cam levered
collet is used to hold the pole in position at
any extended length.
1. To extend the pole, unlock the clamping
lever as shown in Figure 10. Pole will
slide freely.
2. Pull inner pole section out to desired
length of extension.
3. To lock pole in position, tighten clamping
lever as shown in Figure 10.
_J
UNLOCK LOCK
FLgure 10 - Extending Telescopic Pole
Figure 7 - Optional Method of Retaining
Extension Cord
STARTING THE POLE TRIMMER
The Pole Trimmer has a trigger lock button
located on top of the handle. This safety
feature locks the trigger in the OFF posi-
tion, preventing accidental starting of the
Pole Trimmer.
The trigger lock button has 2positions.
Figure 9 - Trigger in OFF Position with
Trigger Lock Button in Position 1
Position 1 locks the trigger.
Position 2 allows you to squeeze the trigger
and operate the Pole Trimmer. The trigger
lock button will automatically spring back to
Position 1 when you release the trigger.
Unlocking the Trigger to Start
the Pole Trimmer
1. Using your thumb, push the trigger lock
button forward to Position 2. Squeeze
the trigger lever to the ON position. The
Pole Trimmer will start running.