Subscribe to Our Youtube Channel
Related Manuals for Jensen SMPS-200
Summary of Contents for Jensen SMPS-200
-
Page 1: User Manual
® PORTABLE STEREO SPEAKERS USER MANUAL SMPS-200 PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE. -
Page 2: Dear Jensen® Customer
The serial number of this product is found on its bottom cover. You should note the serial number of this unit in the space provided as a permanent record of your purchase to aid in identification in the event of theft of loss. Model Number: SMPS-200 Serial Number:... -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. -
Page 4: Compliance With Fcc Regulations
IMPORTANT NOTES Avoid installing the unit in locations described below: • Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters. • Places subject to constant vibration. • Dusty, humid or moist places. COMPLIANCE WITH FCC REGULATIONS This device complies with Part 15 of the FCC Rules. -
Page 5: Product Features
PRODUCT FEATURES The SMPS-200 is a portable stereo speaker with the following features: Auxiliary input jack to play music from your iPod or digital audio player Play music from your computer via the USB port Digital volume control LOCATION OF CONTROLS AUX-IN 1. -
Page 6: Installation
INSTALLATION This unit can be operated either using 4 x “AAA” batteries (not included) or with a USB power adaptor with a rating of DC 5V, 1000mA via the mini USB connector on the back of the unit. USE THE BATTERY POWER 1.) Open the cover of the Battery Compartment located at the bottom of the unit. - Page 7 (1) If you’re connected to the Line Out Jack of your external device then you only need to adjust the volume control on the SMPS-200. If you’re connected to the Headphone Jack of your external device, then you may need to adjust both the volume control of your external device and the volume control on the SMPS-200 to find the most desirable volume setting.
- Page 8 3.) Your computer should automatically switch to use the SMPS-200 as a default system speaker and will be ready to use. If not, please go to your computer control panel and set the default audio sound playback device to the “USB...
-
Page 9: Care And Maintenance
2.) Press the POWER button to turn on the power of the unit to let your computer detected this USB audio device. Your computer should automatically switch to use this unit as a default system speaker after successful detection. If not, please go to your computer system preferences and set default sound output to “USB Audio Device”. -
Page 10: Troubleshooting Guide
TROUBLESHOOTING GUIDE Symptom Possible Problem Solution No batteries installed or Install 4 x “AAA” batteries or replace the installed batteries are exhausted batteries. exhausted. USB power source no Plug the AC adaptor into a wall outlet if you The unit does function or USB cable is not use an USB output of AC adaptor, turn on not respond... - Page 11 90 DAY LIMITED WARRANTY AND SERVICE VALID IN THE U.S.A ONLY SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from defective materials or factory workmanship for a period of 90 days from the date of original customer purchase and provided the product is utilized within the U.S.A. This warranty is not assignable or transferable.
Need help?
Do you have a question about the SMPS-200 and is the answer not in the manual?
Questions and answers