Advanced Image Settings - Sumvision Cyclone Micro 2 User Manual

Advanced Advanced Image Image
Advanced Advanced Image Image Settings:
To get to the advanced image settings press the OSD button on the remote
control whilst viewing an image file. This will bring up a window in the centre
of the screen. From this screen are a number of available options.
View View mode: mode:
View View mode: mode:
This option allows you to change the play mode .
Interval: Interval:
Interval: Interval:
The time slot setting allows you to select the time duration before the player
displays the next image in a slide show.
Available timings:
To adjust the timing, use the NAVIGATION buttons to select the required time
duration. Press ENTER on the remote control to confirm the selection.
Effect Effect Effect Effect switch switch: : : : switch switch
This setting allows you to change the image transition effects.
None
Persian Blinds H
Settings: Settings:
Settings:
1 second
3 seconds
5 seconds
10 seconds
Default setting for slide show.
Image is split into horizontal lines that get
bigger to reveal complete image.
Cyclone Micro 2 Multimedia Player
Page 25.
Version 0.7