Troubleshooting - JVC Everio GZ-HM690U User Manual

• When the battery life is reached, the recording time becomes shorter even if the battery
pack is fully charged. (Replace the battery pack with a new one.)
Troubleshooting
If you encounter problems with this unit, check the following before requesting service.
1 Refer to "Trouble" below.
2 Refer to the "Troubleshooting" section in the "Detailed User Guide".
If you have difficulties operating the unit, refer to the detailed descriptions in the "Detailed
User Guide".
• http://manual.jvc.co.jp/index.html/
3 Refer to the FAQ of new products on JVC's website.
• http://wwwjvc.com/
4 This unit is a microcomputer-controlled device. Electrostatic discharge, external
noise and interference (from a TV, a radio, etc.) might prevent it from functioning
properly.
In such a case, reset the unit.
Turn off the power. (Close the LCD monitor.)
Remove the AC adapter and battery pack from this unit, reattach them, open
the LCD monitor and this unit powers on automatically.
5 If the above do not solve the problem, consult your nearest JVC dealer or JVC
service center.
• The battery pack is being charged. 8
Check the _II / t3 button. 14
Set to the recording mode by tapping the 16
[] button on the screen.
• Turn off this unit, wait for a while, and turn -
it on again. (This unit stops automatically
to protect the circuit when the
temperature rises.)
• Recording stops automatically after 12
hours of continuous recording.
• Sometimes playback is interrupted at the -
connecting section between two scenes.
This is not a malfunction.
For more information, refer to the Detailed User Guide
26 http://manual.jvc.co.jp/index.html/