GE GSD5610D01AA Owner's Manual page 22

Before you call for service...
What ToDo
Problem __ _ • Possible Causes
Cloudiness on
glassware
Combination of soft
water and too much
detergent
Water temperature
entering the dishwasher
exceeds 150=E
This is called etching and
is permanent To prevent
this from happening, use
less detergent if you have
soft water., Wash glassware
in the shortest cycle that
will get them dean,
Lower the water heater
temperature,
Black orgray Aluminum u_ have _ Remove marks with a mild,
markson dishes rubbed against dishes abrasive cleaner.
Yellowor brown film Tea or coffee stains , Remove the stain by hand,
on inside surfaces using a solution of 1/2 cup
bleach and 3 cups "warm
WR_E
A WARNING
Before deaning interior
wait at least 20 minutes
after a cycle for the
healing element to cool
drama Failure to do so can
result in burns
Whitefilm on inside
surfaces
i
An overall yellow or
brown film can be caused
by iron deposits in water
Hard water minerals
A special filter in the x_ter
supply line is the only_y
to correct _ problem,
Contact a z_mer softener
company
¢"To clean the interior, apply
dishwasher detergent to a
damp sponge, Wear
rubber gloves, Do notuse
any type of cleanser other
than dishx_nasher detergent
because it may cause
foaming or sudsing,
Cascade ®Automatic
Dish,cashing Detergent
has been approved for use
in all GE dishwashers
22