Buick 2014 Regal Infotainment System Manual page 44

POI information for each
destination address must be
entered in a single separate line.
In the root directory of a USB drive,
create a folder name myPOIs, e.g.
F:\ is the root directory of the USB
drive.
In the myPOIs folder, store the text
file with your POIs, e.g. F:\myPOIs
\TomsPOIs.csv.
Connect the USB drive or SD card
containing the POI information to
the USB port or SD card slot of the
Infotainment system. A message
displays prompting whether or not to
download the POI information from
the USB stick. All POIs found are
saved even if they are in multiple
folders.
Subfolders can also be created to
organize the POIs into categories.
For example, F:\myPOIs
\Restaurants\TomsPOIs.csv.
If the message is dismissed or
ignored, no POI information is
downloaded. This prompt will not
reoccur for the current ignition cycle.
When the system is finished
downloading, a pop-up displays
asking to specify a category for the
new POIs, if desired.
When POIs are found on a media
device, the date of the file is
examined and compared to the date
for the files already in the system.
If the file being downloaded is
newer than the one on the system,
that particular category of POIs is
overwritten. Any other POIs that had
previously been saved in other
categories are not affected.
If an Address Book is found on the
connected USB device, the same
alert is used to indicate that
locations have been found and they
can be downloaded. If there is
already content in the vehicle
Address Book, the system prompts
if the stored content should be
overwritten. Select Save to
overwrite the existing Address Book
information. Select Cancel to abort
the import of information.