Introduction; Product Registration; Caring For The Fishfinder 400C; Cleaning The Case - Garmin 400C Owner's Manual

Product Registration

Help us better support you by completing our online registration
today! Connect to our Web site at www.garmin.com/registration/.
Use this area to record the serial number (8-digit number located on
the back of the Fishfinder 400C) in case your Fishfinder 400C needs
service. Keep the original sales receipt, or a photocopy, in a safe
place.
Serial Number: ___ ___ ___ ___ ___ ___ ___ __

Contact Garmin

Contact Garmin if you have any questions while using your
Fishfinder 400C. In the USA contact Garmin Product Support
by phone: (913) 397-8200 or (800) 800-1020, Monday–Friday,
8 AM–5 PM Central Time; or go to www.garmin.com/support/, and
click Product Support.
In Europe, contact Garmin (Europe) Ltd. at +44 (0) 870.8501241
(outside the UK) or 0808 2380000 (within the UK).
Tell Us What You Think
Tell us how you like this manual! Fill out the Product
Documentation Survey. Go to www.garmin.com/contactUs/, and
click Product Documentation Survey.
Fishfinder 400C Owner's Manual

Caring for the Fishfinder 400C

The case is constructed of high-quality materials and does not
require user maintenance, except cleaning.

Cleaning the Case

Clean the unit's outer casing (except for the screen) using a cloth
dampened with a mild detergent solution and then wipe dry. Avoid
chemical cleaners and solvents that may damage plastic components.

Cleaning the Screen

The unit's lens is coated with a special anti-reflective coating that
is sensitive to skin oils, waxes and abrasive cleaners. Cleaners
containing ammonia, alcohol, abrasives, or anti-grease detergents
will harm the anti-reflective coating. It is important to clean the lens
using an eyeglass lens cleaner (that is specified as safe for anti-
reflective coatings) and a clean, lint-free cloth.

Water Immersion

The unit is waterproof to IEC Standard 60529 IPX7. It can
withstand immersion in 1 meter of water for 30 minutes. Prolonged
submersion can cause damage to the unit. After submersion, be
certain to wipe and air dry the unit before reuse.
I
ntroductIon
iii