Factory Preset Timing For Reference; Panel Controls And Osd Functions; Auto Tune; Brightness - Quanmax RPD-1151 Hawkeye User Manual

2.1.2 Factory Preset Timing for Reference

VGA 640×350 @ 70Hz
Preset mode
VGA 640X400@70Hz
VGA 720×400 @ 70Hz
VGA 640×480 @ 60/ 72/ 75Hz
SVGA 800×600 @ 56/ 60/ 72/ 75Hz
XGA 1024×768 @ 60/ 70/ 72/ 75Hz

2.2 Panel Controls and OSD Functions

Controls
Power On/Off switch
Auto
Menu

2.2.1 Auto tune

1. Press the "auto tune" bottom. The panel will adjust the display size
automatically and also tune the panel to its best condition.

2.2.2 Brightness

1. Press the "menu" button.
2. Use the ▼ and ▲ button to scroll.
3. Press the "menu" button to enter.
4. Use the ▼ and ▲ button to adjust the brightness of the display.
5. Press the "auto" button to exit.
Soft power on/off button. Adjacent LED is lit when on.
Auto-synchronize and scale down display to any valid
factory preset timings.
Press to scroll the function you want to adjust.
Press to scroll the function you want to adjust.
To access the main menu. This bottom also acts as the
"Enter" bottom.
14
RPD-1151/1158 User Manual
Description