Smart Diagnosis - LG LDS5540ST/WW/BB Owner's Manual

26 TROUBLESHOOTING
SMART DIAGNOSIS TMSYSTEM
Should you experience any problems with your dishwasher, it has
the capability of transmitting data to your Smart Phone using the
LG Smart Laundry & DW Application or via your telephone to the
LG call center.
Smart Diagnosis cannot be activated unless your dishwasher is
turned on by touching the POWER button. If your dishwasher is
unable to turn on, then troubleshooting must be done without
using Smart Diagnosis.
Smarf Diagnosis Using Your Smarf Phone
1. Download the LG Smart Laundry & DW application on your
smart phone.
2. Open the LG Smart Laundry & DW application on your smart
phone.
3. Pressthe Smart Diagnosis button on your smart phone.
4. Press the Diagnosis button on your smart phone
5. Pressthe Dishwasher button on your smart phone.
6. Press the RECORD button on the smart phone and then hold
the mouth piece of the smart phone near the speaker located
on the panel. Hold the phone no more than one inch (but not
touching) the machine.
7. Press and hold the Sanitary button on the dishwasher dis-
play for three seconds.
NOTE
After three seconds, the display will change from - : -- to 17
(LDS5540), 6(LDS5560) and then start counting down the
8. With the phone held in place, press the Smart Diagnosis but-
ton on the phone.
NOTE
I D_onot touch any other buttons or icons on the display
L screen.
9. Keep the phone in place until the tone transmission has fin-
ished. This takes about 17(LDS5540), 6(LDS5560) seconds
and the display will count clown the time.
10. When the recording is complete, view the diagnosis by press-
ing the Next button on the phone.
Smarf Diagnosis Through fhe Call Cenfer
1. Call the LG call center at: (LG U.S.) 1-800-243-0000
(LG Canada) 1-888-542-2623.
2. When instructed to do so by the call center agent, hold the
mouthpiece of your phone near the speaker located on the
panel. Hold the phone no more than one inch (but not touch-
ing) the machine.
@ NOTE
Do not touch any other buttons or icons on the display
screen.
3.
Press and hold the Sanitary button on the display screen for
three seconds.
4. Keep the phone in place until the tone transmission has fin-
ished. This takes about 17(LDS5540), 6(LDS5560) seconds and
the display will count clown the time.
5. Once the countdown is over and the tones have stopped, re-
sume your conversation with the call center agent, who will
then be able to assist you in using the information transmit-
ted for analysis.
F@ NOTE
Smart Diagnosis is a troubleshooting feature designed to as-
sist, not replace, the traditional method of troubleshooting
through service calls. The effectiveness of this feature de-
pends upon various factors, including, but not limited to, the
reception of the cellular phone being used for transmission,
any external noise that may be present during the transmis-
sion, and the acoustics of the room where the machine is lo-
cated. Accordingly, LG does not guarantee that Smart Diag-