Bissell BigGreen 86T3 SERIES User Manual page 11

O
perations
Cleaning with Oxy Gen2 tool
Select models only
1. follow instruction on page 10 to attach
hose to machine.
2. To pretreat heavy traffic areas:
A. pour Oxy gen2 formula into the
Oxy gen2 tool and attach tool to
your machine's hose.
B. hold tool 2-4 inches above the floor
and press red trigger to spray onto
carpet.
C. Wait for 3-5 minutes then clean as
normal using your machine
3.
To use as a spot and stain tool on carpet:
A. pour Oxy gen2 formula into the
Oxy gen2 tool and attach tool to
your machine's hose.
B. hold tool 1-2 inches above the floor
and press trigger to spray onto
carpet. Spray generously, but do not
overwet the carpet.
C. move the bristles back and forth
over the spot.
D. Suction up solution/stain
immediately with your tool.
E. Repeat as needed.
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
11