Multifunction Display - Yamaha YFM66FGX Owner's Manual

EBU18040

Multifunction display

1. Speedometer
2. Fuel meter
3. "H" button
4. "M" button
5. Clock/Hour meter
6. Odometer/Tripmeter A/Tripmeter B
7. "TRIP/ODO" button
8. Clock/Hour " "/" " button
The multifunction display is equipped with the fol-
lowing:
G
a speedometer (which shows the riding speed)
G
an odometer (which shows the total distance
traveled)
G
two tripmeters (which show the distance trav-
eled since they were last set to zero)
G a clock
G an hour meter (which shows the total time the
key has been turned to "ON")
G
a fuel meter
Odometer and tripmeter modes
Pushing the "TRIP/ODO" button switches the dis-
play between the odometer mode "ODO" and the
tripmeter modes "A" and "B" in the following order:
ODO → TRIP A → TRIP B → ODO
To reset a tripmeter, select it by pushing the
"TRIP/ODO" button,
"TRIP/ODO" button for at least three seconds. The
tripmeters can be used to estimate the distance
that can be traveled with a full tank of fuel. This in-
formation will enable you to plan future fuel stops.
NOTE:
Holding in the "TRIP/ODO" button and then turning
the key to "ON" switches the display between
"mph" and "km/h".
4-4
and then push the
4