Whirlpool Air Conditioner Use & Care Manual page 12

To clear Timer delay program:
NOTE: Air conditioner can be either on or off.
Press and hold TIMER for 3 seconds. Timer indicator light will
shut off.
To see or change the remaining time (in hours):
1. Press TIMER once after it has been programmed. Hour
indicator light will turn on, and display will show remaining
time.
2. While the display is showing the remaining time, you can
press the plus or minus button to increase or decrease the
time.
3. After 10 seconds, Hour indicator light will turn off, and Room
indicator light will turn on. Display will show the current room
temperature.
Operate Air Conditioner with Remote Control
NOTE: Remote control may vary in appearance.
Q Q
_EM_/TIME
J
NOTE: Two AA batteries (not included) power the remote control.
Replace batteries after 6 months of use, or when the remote
control starts to lose power.
To turn the air conditioner on or off:
Press POWER.
POWER
To select the mode:
Press AUTO COOL, COOL, FAN ONLY, or POWER SAVER.
• Auto Cool--fan speed is adjusted automatically.
• Cool, Fan Only or Power Saver--you can adjust the fan
speed.
To select the fan speed (in Cool, Fan Only or Power Saver
mode only):
Press TURBO, HIGH or LOW.
To raise the temperature:
Press the plus button. Room indicator light on air conditioner will
turn off, and Set indicator light on air conditioner will turn on.
Display on air conditioner shows the Temperature control setting.
Each time you press or hold the plus button, the temperature will
increase 1° until it reaches 86°F (30°C).
NOTE: After 3 seconds, Set indicator light on air conditioner will
turn off, and Room indicator light on air conditioner will turn on.
Display on air conditioner will show the current room
temperature.
To lower the temperature:
Press the minus button. Room indicator light on air conditioner
will turn off, and Set indicator light on air conditioner will turn on.
Display on air conditioner shows the Temperature control setting.
Each time you press or hold the minus button, the temperature
will decrease 1° until it reaches 64°F (18°C).
NOTE: After 3 seconds, Set indicator light on air conditioner will
turn off, and Room indicator light on air conditioner will turn on.
Display on air conditioner will show the current room
temperature.
To set the Timer for a 1- to 24-hour delay until the air
conditioner turns off (the air conditioner must be On):
1. Press TIMER. Timer indicator light on air conditioner will
flash. Hour indicator light on air conditioner will turn on, and
display on air conditioner will show remaining hours before air
conditioner will turn off.
2=
3.
TIMER
Press the plus or minus button to change delay time (1 to
24 hours).
Press TIMER again or wait 10 seconds. Timer indicator light
on air conditioner will remain on. Hour indicator light on air
conditioner will turn off, and Room indicator light on air
conditioner will turn on. Display on air conditioner will show
the current room temperature.
12