Power Management Setup - Intel OPEN 660 120 User Manual

User Manual version 2.1

7.4.5. Power Management Setup

If the POWER MANAGEMENT SETUP option is selected
from the main menu, the screen below will appear. The
following sample screen consists of the default values for
OPEN (660).
Power Management: Disable
PM Control by APM: Yes
Video Off Method : V/H SYNC+Blank
Video Off After
MODEM Use IRQ : 3
Doze Mode:
Standby Mode
Suspend Mode:
HDD Power Down
Throttle Duty Cycle
PCI/VGA Active Monitor : Disabled
Soft-Off by PWR-BTTN : Instant-Off
Rower on by Ring
IRQ 8 Break Suspend
7-94
ROM PCI/ISA BIOS (2A69KHE9)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
: Standby
: Disable
: Disable
: Disable
: Disable
: 62.5%
: Disabled
: Disabled
** Reload Global Timer Events **
IRQ(3-7, 9-15) NMI
Primary IDE 0
Primary IDE 1
Secondary IDE 0
Secondary IDE 1
Floppy Disk
Serial Port
Parallel Port
ESC: Quit
F1 : Help PU/PD/+/-: Modify
F5 : Old Values (Shift )F2 :
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
OPEN (660) 120/140/150
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Enabled
: Disabled
: Select Item
Color