Advanced Picture Settings - Westinghouse VR-3725 User Manual

PC Settings
PC Settings Menu is aviliable only in PC DB15
or DVI mode. When DVI signal input, only
Horizontal.
Position and Vertical Position can be adjusted.
Press ▼/▲ to highlight one of the following
options, then press ENTER to select it.
Horizontal Position
0
Auto Adjus
t Automatically adjust Clock, Phase, H-Position and V-Position settings.
In order to get a good result, you should open a"filling the screen"picture before executing
Auto Adjust.
Horizontal Position
Vertical Position
Clock
Adjust the DB15 picture signal sampling clock rate.
Phase
Adjust the Db15 picture signal sampling phase. It maybe affect the definition . Wrong
value maybe result the interference.
Reset
Reset the parameters of current menu to default value.

Advanced Picture Settings

▼/▲
to highlight the item and press
Press
►
ENTER or to display the sub-menu as
following.
Dynamic Contrast
The system will adjust the luminance cur ve
by analyzing the picture content
dynamically.
Film Mode
Off/On
For the 2:2 or 3:2 format signal of cinema ,
enable special pixel process to reduce the
flick of area.
moving
Noise Reduction
You can clear up analog TV signal by reducing the dot noise. This feature is not
available at PC or Media source.
MPEG Noise Reduction
Similar with the Noise Reduction, you can set to reduce the block noise.
Shift the screen slightly to
Shift the screen slightly up or down.
Off/Low/Medium/High
Off/Low/Medium/High
Off/Low/Medium/High
: Move
left or right.
: Move
20
The On-Screen Menu
.