Changing Channels; Selecting The Input Source - Westinghouse UW32SC1W User Manual

BASIC OPERATIONS
Follow the instructions below to change channels.
Using the Ch
Browse channels
To browse through the available channels, press Ch
the remote control or on the control panel.
Using the Channel Keys
Selecting channel
To change to a certain channel, key in the channel number using
the channel keys and press ENT.
Selecting digital channel
To select a digital channel, key in the digital channel number using
the channel keys and the • key, then press ENT.
Using the Favorite Keys
Selecting favorite channels
To select a favorite channel, press the Favorite button (A, B, C, or
D) corresponding to the preferred channel.
Saving a channel as a favorite
1 Switch to the channel you want to add as a favorite.
2 Press and hold the Favorite button which you want to add
3 The Channel Saved message appears to confirm the new
There are two ways to select the video input source.
Using the Individual Input Keys
TV, VGA, Video, YPbPr, HDMI Keys
Press any of the following remote control keys to change the input
source: TV, VGA, Video1, YPbPr1, HDMI1, or HDMI2.
Buttons
/
the current channel to for 3 seconds.
favorite channel item.
/ on