Table of Contents
Advertisement
Confirm that Anti-Vibration
l
Switches on both left and
right sides are set to
position 45.
Attach brackets (L) and (R)
l
using the hexagonal bolts
Attach brackets (L) and (R)
l
to their respective
brackets (B) using the
hexagonal bolts (M6 x 20)
and the hexagonal nuts
(M6).
I
Pull back the carpet and determine
l
where to attach the unit.
Stick the supplied double-sided tape
l
to the bottom of the brackets (B) and
peel off the paper backing.
Affix the unit to the floor by pressing
l
in place.
Using a knife, cut Y's in the carpet
l
directly above the brackets (B) bolts.
Return the carpet to its original
l
position allowing the bolts to
protrude through.
10
Remove the hexagonal nuts and
l
take off the changer.
Once more, use the hexagonal nuts
l
to attach the changer on top of the
carpet.
Advertisement
Table of Contents
