Download  Print this page

KitchenAid KIRD862HSS Quick Quide

36" retractable downdraft vent system.
Hide thumbs
   

Advertisement

www.dexpress.com
This Data Sheet Includes Information On
KitchenAid
Product Model Number (s):
36" Retractable Downdraft Vent System:
KIRD862HSS
Kit: KPED890T
Dimensions (Actual Size)
Vent overall depth:
Vent overall width:
Vent cutout depth:
Vent cutout width:
Raised vent distance:
Vent height below countertop:
Additional Information
• Electrical requirements: Voltage 115, single phase,
60Hz. AC. Ampere 15. Grounded circuit required.
Locate power supply junction box at lower right corner
of cabinet.
• KitchenAid exterior power system, Part No.
KPED890, is required to complete this system.
• Installation location should be away from strong draft
areas, such as windows doors and strong heating
vents. Before making cutout, check that vent and
cooktop location will clear cabinet walls, backsplash
and rear wall studs inside cabinet.
• All openings in wall or floor where vent is to be
installed must be sealed.
• See cooktop manufacturer's installation instructions
for cooktop cutout depth and width.
• NOT approved for use in mobile homes.
• 36" minimum base cabinet is required. 3 1/2" depth
clearance from countertop to top of cabinet drawers (or
other obstructions in base cabinet) is required.
• Cabinet drawer may need to be removed and
permanent drawer front installed.
• Use either 9" round (recommended) or 3 1/4" x 10"
ductwork. Maximum length of ductwork for both 9"
round and 3 1/4" x 10" is 55 feet.
• Stainless Steel finish.
See pages 2-3 for additional information
Subject to change without notice. This system is designed to
be updated daily if necessary. Dimension Express is not
responsible for use of superseded, voided, or outdated data
sheets. Because of the difficulty or impracticability of deter-
mining actual damages, liability of Dimension Express shall
not exceed $50.00.
Copyright © Dimension Express, 2000.
• NEVER reuse Data Sheets. Data Sheets are subject to change without
notice. Dimension Express is a FREE service bureau and is updated daily,
it makes far more sense to spend the time necessary to request new Data
Sheets for each project, as opposed to the problems, time, costs, and risks
associated with reusing old Data Sheets.
DIMENSION EXPRESS
2 1/8"
36"
1 7/8"
33 1/2"
8 1/4"
26 1/8"
Countertop
284
2 1/8"
1 7/8"
Cutout vent dimensions
Overall vent dimensions
Cooktop
36"
Vent
Raised
Vent Intake
Cabinet Floor
Side View
(not to scale)
Interior housing
• Call Dimension Express if you have any questions at (775) 833-3633 •
• Always refer to a current Code at a Glance or manufacturer directory •
• Data Sheet codes change on the first of odd numbered months at 12:01am •
Fax on Demand (775) 833-3600
36"
33 1/2"
Countertop front edge
8 1/4"
26 1/8"
Vent Junction Box
Cooktop
2 1/8"
6 1/8"
BN53 • A284B149C116 • 11751 • 001311 • 215841 • 52906
Backsplash
Wall View
(not to scale)
Vent Intake

Advertisement

Table of Contents

   Also See for KitchenAid KIRD862HSS

   Related Manuals for KitchenAid KIRD862HSS

   Summary of Contents for KitchenAid KIRD862HSS

  • Page 1 Locate power supply junction box at lower right corner of cabinet. 36" Wall View • KitchenAid exterior power system, Part No. (not to scale) KPED890, is required to complete this system. Vent • Installation location should be away from strong draft Raised 8 1/4"...
  • Page 2 • For best performance, use no more than three 90° elbows. If more • Unit is to be used with KitchenAid external blower kit KPED890T. than one elbow is used, make sure that there is a minimum of 24" of •...
  • Page 3 DIMENSION EXPRESS • Product Model Number (s): • Page 3 Fax on Demand (775) 833-3600 36" Retractable Downdraft Vent System: KIRD862HSS Kit: KPED890T Cutout sizes when used with KitchenAid cooktops 3/4" max. backsplash depth. 1/2" min. to backsplash or rear wall Required min.

This manual is also suitable for:

Kped890t

Comments to this Manuals

Symbols: 0
Latest comments: