JBL Control® 28 Specifications

Control
Professional Series

Key Features:

Components: 8" Polypropylene
coated woofer, 1" Titanium coated
horn loaded tweeter.
Built-in InvisiBall TM mounting
hardware*
Weather resistant enclosure and
transducers
Readily paintable
90° x 90° high frequency horn
Overload Protection Circuitry
Sensitivity: 92 dB SPL, 1W, 1m
*Patents pending worldwide
The Control 28 is the largest of
®
JBL Professional's Control Contractor
Series indoor/outdoor loudspeakers.
Its rich sonic character makes the
Control ® 28 a perfect choice for
restaurants, health clubs, under bal-
cony, outdoor theme & water parks,
or other applications where fore-
ground/background music and pag-
ing are required.
The unique and global patent
pending InvisiBall ™ mounting hard-
ware is included in each system and
makes short work of permanent
installation. The InvisiBall™ mounting
method adds the benefit of vertical
rotation of up to 37° off-axis and hor-
izontal rotation of up to 44° off-axis.
Because InvisiBall ™ adjustments are
made through a hidden access
behind the logo badge, the grill
never needs to be removed and there
exists a high degree of theft deter-
rence as well.
The Control ® 28 readily accepts a
variety of paints and finishes to
match any decor.
Weather resistance is maximized by
coating the woofer cone in
polypropylene and terminating its cir-
cumference in JBL's WeatherEdge™, a
seamless, rubberized extension of the
woofer surround that provides added
protection to critical transducer ele-
ments. The polycarbonate tweeter
diaphragm is reinforced with a thin
film of titanium for added rigidity and
endurance against sun, salt and mois-
ture. Zinc plated grilles resist rusting
in the harshest conditions.
Available in black (Control 28) and
white (Control 28-WH).
28
®
Specifications:
Frequency Range (-10 dB) : 60Hz to 16kHz
1
Continuous Program:
Power Capacity 2 : 175 Watts
Sensitivity : 92 dB SPL, 1W, 1m
3
Directivity Factor (Q): 7.5
Directivity Index (DI): 8.8
Nominal Impedance: 8 ohms
Crossover Frequency: 2.8kHz
LF Driver: 200mm (8 in) Polypropylene cone w/WeatherEdge
HF Driver: 25mm (1 in) Titanium coated polycarbonate
Enclosure Material: HIPS (High Impact Polystyrene)
Overload Protection: Full-Range power limiting to protect network and transducers
Termination: Spring terminals, accepts banana plug
Environmental: Conforms to Mil Spec 810 for humidity, salt spray,
Dimensions (H x W x D): 380 x 280 x 220 mm (15.0 x 11.0 x 8.6 in)
Net Weight (ea): 5.5kg (12 lbs)
Shipping Weight (pr): 11kg (25 lbs)
Included Accessories: Invisiball Assembly
Optional Accessories:
MTC-28V: For vertical columnar orientation of up to 3 loudspeakers
MTC-28H: For horizontal splaying of two speakers. Three brackets array
MTC-28/25CM: Ceiling-mount adapter.
Half-space (on-wall).
1
2 Continuous program power is a conservative expression of the system's ability to handle normal speech and music
program material and is defined as 3dB above the Continuous Pink Noise Rating (IEC-shaped pink noise with a 6dB
crest factor, for 100 hours continuously).
3 Half-space (on-wall), ave 100Hz to 10 kHz.
JBL continually engages in research related to product improvement. Changes introduced into existing products without
notice are an expression of that philosophy.
High Output
Indoor/Outdoor
Background/Foreground Speaker
temperature & UV. IEC 529 IP-X4 splashproof rating.
6mm x 180mm hex key
up to six loudspeakers in a 360° array.