Advertisement
Changing TCP/IP Network Information
From the TCP/IP Print Server Configuration Utility, arrow left to the CONFIGURE drop down
menu.
File
Arrow to select "IP STACK" or press "I".
This Machine's Address:
Subnet Mask:
Default Gateway Address:
ESC to Cancel, CTRL + ENTER to Store
The IP addresses and Subnet Mask should be pre-filled with the machine's previous configuration
(initial configuration will show all zeros as indicated above). Over type the old configuration
data with the new. If an IP address has an octet less then three characters in length, DO NOT
ENTER A LEADING ZERO (example: enter "15" not "015").
When finished, press CTRL+ENTER to store.
IF CONFIGURATION IS COMPLETE, REMEMBER TO SAVE AND
BACKUP THE CONFIGURATION!
TCP/IP Print Server – Changing TCP/IP or Host Access Configuration (10/29/01 mlr)
Configure
Help
IP Stack
Network Parameters
Printer Ports
Manual Override
__0. __0. __0. __0
__0. __0. __0. __0
__0. __0. __0. __0
6
Advertisement
