Summary of Contents for Galileo TCP/IP Print Server
- Page 1 Galileo International Technical Support Documentation TCP/IP Print Server Changing TCP/IP or Host Access Configuration...
- Page 2 Galileo International. Trademarks Apollo, Galileo and the Globe Device are registered trademarks, trademarks or service marks of Galileo International in the United States and/or other countries. Galileo International may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this document.
-
Page 3: Before You Begin
(MIR). Galileo also provides Focalpoint Print Manager™, a Windows™ based print distribution application. If you use this solution for Galileo® or Apollo® host printing, please refer to the instruction guide for that application to make appropriate changes. This document will provide the steps required in changing configuration settings. These include:... - Page 4 SAVE | BACKUP | RESTORE | PRINT | EXIT CONFIGURE IP STACK | NETWORK PARAMETERS | PRINTER PORTS | MANUAL OVERRIDE HELP IMPORTANT!! Always SAVE changes to configurations BEFORE exiting the Print Server Configuration Utility. TCP/IP Print Server – Changing TCP/IP or Host Access Configuration (10/29/01 mlr) Help...
- Page 5 Save and Back-up Print Server Configuration After making ANY changes to a TCP/IP Print Server, Save the changes and back them up or any change may be lost. From the TCP/IP Print Server Configuration Utility, arrow left to the FILE drop down menu.
- Page 6 Changing TCP/IP Network Information From the TCP/IP Print Server Configuration Utility, arrow left to the CONFIGURE drop down menu. File Configure IP Stack Network Parameters Printer Ports Manual Override Arrow to select “IP STACK” or press “I”. This Machine’s Address:...
- Page 7 Changing Configuration Server Addresses and Client Identifier From the TCP/IP Print Server Configuration Utility, arrow left to the CONFIGURE drop down menu. File Configure IP Stack Network Parameters Printer Ports Manual Override Arrow to select “NETWORK PARAMETERS” or press “N”.
- Page 8 The GTID or Global Terminal ID must be assigned to the correct port to where the print device is connected. Artic Cards may have either 4 or 8 ports where port “0”, or the first port, is unused. From the TCP/IP Print Server Configuration Utility, arrow left to the CONFIGURE drop down menu.
- Page 9 If necessary, change the GTID on an assigned port. Do NOT change the BAUD, PARITY, DATA or STOP. If the settings do NOT match those above, please contact your Galileo or Apollo Account Representative before making any further changes. If so directed to change these settings, arrow to the field and press the F2 key for a list of available choices.