Reviewing An Image Right After Shooting; Basic Shooting Functions; Selecting A Shooting Mode - Canon Digital IXUS 800 IS User Manual

2. Press the shutter button fully
to shoot.
The shutter sound will play and the
image will record. The indicator will
blink green while the image is
recorded to the memory card.

Reviewing an Image Right After Shooting

After a shot is taken, the image appears in the LCD monitor for
approximately 2 seconds.
You can continue to display images regardless of the review duration
setting with the following procedures.
• Keeping the shutter button pressed after a shot.
• Pressing the FUNC./SET or DISP. button while the image is displayed in
the LCD monitor.
To stop displaying the image, press the shutter button halfway.

Basic Shooting Functions

Selecting a Shooting Mode

1. Turn the mode dial to the desired mode (
In the
( ) and use the
( ), then press the FUNC./SET button (
6
See Basic Shooting Functions
See the Advanced Guide: Indicators (p. 22).
See the Advanced Guide: How to Use the IS Mode (p. 35).
See the Advanced Guide for the various shooting methods
available.
See the Advanced Guide: Review (p. 27).
See Basic Erasing
, and modes, press the FUNC./SET button
or button to select a shooting mode
(p. 6).
(p. 11).
).
).