Hitachi Ultrastar SCSI Interface HUS103014FL3600 Oem Manual page 40

12.2.2 Disable Auto Start
WIDE LVD
No. Option Jumper Connector (C3)
1 Remove the Jumper Socket
for C3-9,10 (Default)
1
2
2 Install the Jumper Socket
for C3-9,10
1
2
12.2.3 Force Single-Ended bus mode
WIDE LVD
No. Option Jumper Connector (C3)
1 Remove the Jumper Socket
for C3-11,12 (Default)
1
2
2 Install the Jumper Socket
for C3-11,12
1
2
9 23
10 24
9 23
10 24
11 23
12 24
11 23
12 24
Meaning
Spindle motor automatically
starts when the power is
applied or in sequence via ID
number x 10 seconds from the
time power is applied if
C3-13,14 is jumpered.
Spindle motor starts only
by SCSI command
Meaning
The drive can be used as
single-ended or low voltage
differential mode.
The drive is forced to operate
only in single-ended mode.
Drawing No. Sheet No. Revision
K6610091 40/43 2005/2/23