Operate - Kompernass KH4083-10 Operating Instructions Manual

➩ Press the „+" button or the „–" button to set the current hour.
➩ Confirm your selection with the
The minute value now blinks in the display
➩ Press the „+" button or the „–" button to set the minutes.
➩ Confirm your selection with the
The clock is now set.
➩ Press the „M" button to return to automatic mode.

Operate

Programming
You can programme up to 8 switching sequences with different
amounts of water flow-through.
➩ Press the „M" button until a bar is shown above the
display y .
The watering computer is now in the programming mode. Blinking in
the display y , to the right of the % symbol, is the notification 100%.
button.
y .
button.
- 7 -
in the