Setting The Clock - Kompernass KH4083-10 Operating Instructions Manual

➩ Push the battery compartment
compartment
➩ Whilst the batteries are being exchanged, „PO" appears in the dis-
play y .
For as long as the PO display is blinking, the watering computer
will retain its programming. If the display goes blank, the program-
ming has also been deleted.
Connecting to the water mains
➩ Screw the inflow connector
(1"-external thread).
➩ Screw the outflow connector
Ensure that the outflow connector

Setting the Clock

➩ Open the cover
➩ Press the „M" button until a bar
symbol and a bar blinks under „"MON".
The watering computer is now in the clock setting mode.
➩ Press the „+" or „–" button to set the current day of the week.
➩ Confirm your selection with the
The hour value now blinks in the display
w must click in audibly.
q
e
r .
w back into the housing. The battery
on to a suitable 3/4" water tap
on to a water hose.
e is always pointed downwards.
y appears in the display above the
button.
y .
- 6 -