Table of Contents
Advertisement
•
Do not leave your wireless device and accessories in a place with a
considerably low or high temperature.
•
Use only accessories of the wireless device approved by the manufacturer.
Contact the authorised service centre for any abnormality of the wireless device
or accessories.
•
Do not dismantle the wireless device or accessories. This will void the warranty.
Emergency Call
This wireless device functions through receiving and transmitting radio signals.
Therefore, the connection cannot be guaranteed in all conditions. In case of
emergency, you should not rely solely on the wireless device for essential
communications.
Specific Absorption Rate (SAR)
Your wireless device is a radio transmitter and receiver. It is not designed to exceed
the limits for exposure to radio waves recommended by international guidelines.
These guidelines are developed by the independent scientific organisation ICNIRP
and include safety margins designed to assure the protection of all persons,
regardless of age and health.
The guidelines use a unit of measurement known as the Specific Absorption Rate,
or SAR. The SAR limit for wireless devices is 2.0 W/kg and the highest SAR value
for this device when tested complied with this limit.
Body Worn Operation
Important safety information regarding radiofrequency radiation (RF) exposure.
To ensure compliance with RF exposure guidelines the device must be used with a
minimum of 1.5 cm separation from the body.
9
Note:
For details about setting the profile, contact your service provider.
Creating a Dial-up Profile
1. Click New to set the profile name, access number, user name, password, Access
Point Name (APN) and APN status
2. Click Advanced to set the IP information, authentication protocol, Domain Name
Server (DNS) and Windows Internet Name Service (WINS)
3. Click OK to save the advanced settings and return to the Dial-Up interface
4. Click OK and the Prompt dialog box is displayed
5. Click Yes to save the settings; or click No to cancel the settings
Editing a Dial-up Profile
1. In the Profile Name drop-down combo box, select a setting
2. Click Edit to modify the profile name, access number, user name, password,
APN name and APN status
3. Click Advanced to set the IP information, authentication protocol, DNS, and WINS
4. Click OK to save the advanced settings and return to the Dial-Up interface
5. Click OK and the Prompt dialog box is displayed
6. Click Yes to save the settings; or click No to cancel the edits
Deleting a Dial-up Profile
1. In the Profile Name drop-down combo box, select a setting
2. Click Delete and the Prompt dialog box is displayed
3. Click Yes to delete the setting; or click No to cancel the deletion
9
Advertisement
Table of Contents
