Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Gilson 508
- Page 1 508 Interface Module User’s Guide...
- Page 3 508 Interface Module User’s Guide World Headquarters Gilson S.A.S. Gilson, Inc. 19, avenue des Entrepreneurs 3000 Parmenter Street F-95400 VILLIERS LE BEL P.O. Box 620027 France Middleton, WI 53562-0027 USA Telephone: 608-836-1551 Fax: 608-831-4451 www.gilson.com sales@gilson.com, service@gilson.com, training@gilson.com ©2006 Gilson, Inc. All Rights Reserved.
-
Page 5: Table Of Contents
Unit End-of-Life ......... . . 5-4 Gilson 508 Interface Module User’s Guide... - Page 7 Introduction The Gilson 508 Interface Module connects your computer to many instruments made by Gilson. It permits bi-directional communication by interconverting the RS-232 signal levels used by computers and the RS-422/485 signal levels required by the Gilson Serial Input/Output Channel (GSIOC).
-
Page 8: Unpacking
508 Interface Module • RS-232 cable • power supply • Euro plug adapter Documentation The following documents are included with the 508 Interface Module: • 508 Interface Module Documentation CD • Declaration of Conformity Gilson 508 Interface Module User’s Guide... -
Page 9: Customer Service
If you need assistance, please contact your Gilson-authorized representative. Specific contact information can be found on the Gilson website at www.gilson.com. To help us serve you quickly and efficiently, please refer to Repair and Return Policies on page 5-3. -
Page 10: Technical Specifications
Please be aware of the following before connecting the interface module. Warning! Changes or modifications to the interface module not expressly approved by Gilson could void the factory-authorized warranty. The interface module has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC commercial environment. - Page 11 Installation The 508 Interface Module is pre-configured as an RS-232-to-GSIOC interface. Turn off and unplug all computers and instruments before making the connections described in this section. Gilson 508 Interface Module User’s Guide...
-
Page 12: Electrical Connections
RS-232 Locate the RS-232 cable provided with the interface module. Attach the male end of the RS-232 cable to the 508 RS-232 input. Tighten the retaining screws. Connect the female end of the RS-232 cable to the computer’s RS-232 serial communications port. - Page 13 Installation Refer to the diagram below to connect the 508 to another Gilson instrument using a GSIOC cable. 9-pin female 9-pin female connector; connect connector; to the GSIOC port connect to on the interface GSIOC port of module GSIOC device 9-pin male connector;...
- Page 14 Operation The 508 Interface Module provides RS-232-to-GSIOC interface from the computer. Gilson control software packages let you issue GSIOC commands that communicate with any GSIOC device connected to the interface module. Gilson 508 Interface Module User’s Guide...
-
Page 15: Status Lights
The status lights on the 508 Interface Module are useful for verifying operation. If the Power light is off, power is not being sent to the interface module. If the RS-232 light is flashing, the 508 Interface Module is responding to the RS-232 input. - Page 16 Maintenance The 508 Interface Module should not require maintenance. The best precautions for continued operation are to avoid spilling liquids on the connectors and to avoid mechanical strain on the wire connections. Gilson 508 Interface Module User’s Guide...
- Page 17 Troubleshooting When using the 508 Interface Module with Gilson-supplied accessories, computers and application software, troubleshooting is simple. Most problems are due to improper connections and installation. Gilson 508 Interface Module User’s Guide...
-
Page 18: Troubleshooting Chart
Check RS-232 port of computer for proper operation with other RS-232 devices. GSIOC devices do not respond to commands • Check GSIOC cable connections. • Check GSIOC device unit ID numbers and baud rate settings (must be 19200 or External). Gilson 508 Interface Module User’s Guide... -
Page 19: Repair And Return Policies
Troubleshooting Repair and Return Policies Before Calling Us Gilson-authorized representatives will be able to serve you more efficiently if you have the following information: • the serial number and model number of the instruments involved. The serial number is located on the bottom of the unit. -
Page 20: Return Procedure
Troubleshooting Return Procedure Contact your local distributor’s Customer Service Department to obtain authorization before returning any Gilson equipment. To return a piece of equipment: • Carefully pack the unit to prevent damage in transit. Check with your distributor regarding proper method of shipment. No responsibility is assumed by Gilson or your distributor for damage caused by improperly packaged instruments.