Table of Contents
Advertisement
Should it be needed in a threatening situation, or you feel the need to attract
attention, the alarm can be triggered using the remote control. Your alarm fea-
tures "Panic Mode", which allows you to activate "Panic" from the "Arm or Dis-
arm" buttons.
To Activate Remote Panic:
Press & Hold the "Arm or Disarm" Button for 3 seconds, with the
ignition "Off".
Hold 3 seconds
The Auxiliary Channel may be used to operate an optional function. Please
see your Omega dealer for details on available options.
To Activate the Auxiliary Channel:
Press & Hold the
Hold 3 seconds
- The Auxiliary Channel cannot be activated if the vehicle's ignition is "On".
This security system is equipped with a dual stage Digital Tilt Sensor to increase
it's effectiveness. Each time the alarm is armed, the tilt sensor enters a 5 second
learning period in which it automatically samples it's current position. If there is
any deviation from this position while armed, the alarm will prewarn or trigger. If
a change in position is detected for less than 2 seconds, the system will prewarn.
If the change is detected for longer, the system will enter a full trigger mode. The
sensor's sensitivity is adjustable by remote using the following procedure.
To Adjust the Tilt Sensor:
With the System Armed or Disarmed Press & Hold the "
for 5 seconds.
Remote Panic Operation
The Auxiliary Channel
Button for 3 Seconds.
"••"
Digital Tilt Sensor
Hold 5 seconds
Page 4
• The siren will sound.
• The parking lights will flash.
• The siren will emit a long chirp.
• The parking lights will flash once
(Or the horn will sound if connected)
(Continued on next page)
Button
•••"
Advertisement
Table of Contents
