Crime Guard 533i3 Operation Manual page 14

Feature #11 Door Lock/Unlock Pulse Duration
(Factory Default Setting .8 Second)
This feature offers the selection of a .8 second or a 3 second pulse
duration of the system's doorlock outputs. Certain vehicles have power
doorlocking systems which are vacuum operated, and thus require a longer
output pulse from the Crime Guard system. While use of this feature is
determined by the type of vehicle the system is installed in, this feature does
save the owners of such vehicles the added expense of a special adapter.
Programming Door Lock/Unlock Pulse Duration:
Follow Steps 1 to 4 on page 20; at Step 4 the Valet Switch will be pressed
and released eleven times. The system's response will be eleven siren chirps,
and the Status Light flashing eleven times, pausing, then repeating. Within
10 seconds, press and release the transmitter's Large Upper Button to
configure the doorlock pulse for .8 second (the siren will chirp once) or the
Small Lower Button to configure the doorlock pulse for 3 seconds (the siren
will chirp twice).
Feature #12 Ignition Activated Vehicle Recovery
The Vehicle Recovery feature activates the system into an alarm condi-
tion automatically in the event that you are forced from your car. "Ignition
Activated" Vehicle Recovery is one three methods of activating this feature,
which is explained on page 18.
Programming Ignition Activated Vehicle Recovery:
Follow Steps 1 to 4 on page 20; at Step 4 the Valet Switch will be pressed
and released twelve times. The system's response will be twelve siren
chirps, and the Status Light flashing twelve times, pausing, then repeating.
Within 10 seconds, press and release the transmitter's Large Upper Button
to turn on Ignition Activated Vehicle Recovery (the siren will chirp once) or
the Small Lower Button to turn this feature off (the siren will chirp twice).
Feature #13 Door Activated Vehicle Recovery
The Vehicle Recovery feature activates the system into an alarm condi-
tion automatically in the event that you are forced from your car. "Door
Page 27
(Factory Default Setting Off)
(Factory Default Setting Off)
Activated" Vehicle Recovery is one three methods of activating this feature,
which is explained on page 18.
Programming Door Activated Vehicle Recovery:
Follow Steps 1 to 4 on page 20; at Step 4 the Valet Switch will be pressed
and released thirteen times. The system's response will be thirteen siren
chirps, and the Status Light flashing thirteen times, pausing, then repeating.
Within 10 seconds, press and release the transmitter's Large Upper Button
to turn on the Door Activated Vehicle Recovery feature (the siren will chirp
once) or the Small Lower Button to turn this feature off (the siren will chirp
twice).
Feature #14 Transmitter Activated Vehicle Recovery
This form of the Vehicle Recovery feature gives you the option of
activating the Vehicle Recovery operation from the transmitter in the event
that you are forced from your car. "Transmitter Activated" Vehicle Recov-
ery is one three methods of activating this feature, which is explained on page
18.
Programming Transmitter Activated Anti Car-Jacking:
Follow Steps 1 to 4 on page 20; at Step 4 the Valet Switch will be pressed
and released fourteen times. The system's response will be fourteen siren
chirps, and the Status Light flashing fourteen times, pausing, then repeating.
Within 10 seconds, press and release the transmitter's Large Upper Button
to turn on the Transmitter Activated Vehicle Recovery feature (the siren will
chirp once) or the Small Lower Button to turn this feature off (the siren will
chirp twice).
Feature #15
This feature prevents your system from being disarmed accidentally,
configuring the system to automatically rearm itself 90 seconds after it has
been Disarmed by the transmitter. The operation of the Automatic Rearm-
ing feature is explained in more detail on page 10.
Page 28
(Factory Default Setting Off)
Automatic Rearming
(Factory Default Setting On)