Table of Contents
Advertisement
B
OTTOM FEED CONTINUOUS FORM FAN
Ensure that the printer is switched OFF and the power supply lead
removed.
1.
Place the printer on a slotted printer stand, carefully aligning
the slot in the stand with the slot in the base of the printer.
2.
Place a box of fan-fold paper under the printer stand.
3.
Remove the Access cover.
4.
Move the Bail arm lever (2) (on the left-hand side of the
printer) to the front of the machine to lift the Bail bar.
5.
Move the Paper lever (3) (on the right-hand side of the printer)
to the front of the machine, to the fan-fold symbol.
6.
Insert the first sheet of paper through the opening in the
printer stand and the bottom of the printer.
7.
Adjust the Platen sprocket(s) to align with the sprocket holes
in the paper.
8.
Use the Platen knob to gently pull the paper up until it appears
in front of the platen, and above the Bail bar
9.
Move the Bail arm lever to the rear of the machine to lower the
Bail bar (6).
10.
Use the Platen knob (5) to advance the paper to the first
printing line.
11.
Replace the Access cover and switch the printer ON.
SETTING UP YOUR PRINTER > 20
-
FOLD PAPER
Hide quick links:
Advertisement
Table of Contents
