Craftsman 917.250222 Operator's Manual page 19

DECK WASHOUT PORT
Your tractor's deck is equipped with awashout
port as part of its deck wash system. It should
be utilized after each use.
1. Drive the tractor to a level, clear spot on
your lawn, near enough to a water spigot
for your garden hose to reach,
IMPORTANT: Make certain the tractor's
discharge chute is directed AWAY from your
house, garage, parked cars, etc. Remove bag-
ger Chute or mulch cover if attached.
2. Make sure the attachment clutch control
is in the "DISENGAGED" position, set
the parking brake, and stop the engine.
3. Threadthenozzleadapter(packagedwith
your tractor's Operator's Manual) ontothe
end of your garden hose.
4. Pull back the lock collar of the nozzle
adapter and push the adapter onto the
deck washout port at the left end of the
mower deck, Release the lock collar to
lock the adapter on the nozzle.
Hose
N°zzle---"'_
i ....... _'" _I
IMPORTANT: Tug hose ensuring connection
is secure.
5, Turn the water on.
6, While sitting in the operator's position on
the tractor, re-start the engine and place
the throttle lever in the Fast ",_" position.
IMPORTANT: Recheckthe areato ensurethe
area is clear. Ensure no children are' in the
area while cleaning the deck.
7. Move the tractor's attachment clutch con-
tro[ to the "ENGAGED" position. Remain
in the operator's position withthe cutting
deck engaged until the deck is cleaned.
8. Move the tractor's attachment clutch con-
trol to the "DISENGAGED" position. Turn
theignition keytothe STOP positiontoturn
the tractor's engine off. Turn the water off.
9. Pull back the lock collar of the nozzle
adapter to disconnect the adapter from
the nozzle washout port.
t0. Move the tractor to adry area, preferably
a concrete or paved area, Place the at-
tachment clutch control inthe"ENGAGED"
position to remove excess water and to
help dry before putting the tractor away,
,_k,WARNING: A broken or missing washout
fitting could expose you or others to thrown
objects from contact with the blade,
, Replace broken or missing washout fitting
i mmediately, prior to using mower again.
- Plug any holes in mower with bolts and
Iocknuts.
19