Dvd/Vcd Video Operation - Jensen VM9324 Operating Instructions Manual

VM9324

DVD/VCD VIDEO OPERATION

NOTE: When properly installed, DVD video cannot be displayed on the
main TFT screen unless the parking brake is applied. If you attempt to
play a DVD while the vehicle is moving, the TFT screen displays
"WARNING!!! It is illegal to view video while driving or operating a motor
vehicle, Set parking brake to view video." Rear video screens, if
applicable, will operate normally.
Inserting a Disc
Upon inserting a DVD disc in the disc slot (7), DVD mode is entered and disc
play begins.
NOTE: If Parental Lock (Rating) is activated and the disc inserted is not
authorized, the 4-digit code must be entered and/or the disc must be
authorized (see "VIDEO Sub-menu Features" on page 22).
You cannot insert a disc if there is already a disc in the unit or if the power is
off.
NOTE: DVD-R and DVD-RW will not play unless the recording session is
finalized and the DVD is closed.
Ejecting a Disc
Press the button (8) on the unit or remote control (35) to eject the disc. The
unit automatically reverts to Tuner mode. You may eject a disc with the unit
powered off. The unit will remain off after the disc is ejected.
Resetting the Loading Mechanism
If the disc loads abnormally or an abnormal core mechanism operation occurs,
press and hold the button (8) on the unit or remote control (35) to reset the
loading mechanism. Normal operation resumes.
29