Whirlpool w10524376b Use & Care Manual page 9

CYCLE GUIDE -- MANUAL CYCLES
Settings and options shown in bold are default settings for that cycle.
Not all features and cycles are available on all models.
Not all settings and options are available on each cycle.
Selecting the Drying Temperature
A High heat setting may be used for drying heavyweight items such as towels and work clothes.
A Low to Medium heat setting may be used for drying medium-weight items such as sheets, blouses, dresses, underwear,
permanent press fabrics, and some knits.
Use a no heat (air dry) setting for foam, rubber, plastic, or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for various loads, refer to the care label directions.
items to dry: Cycle: Temperature: Time: Options: Cycle Details:
Small loadsand Quick Dry High 13 Wrinkle ShieldTMt
_
For small loads of 3-4 items.
sportswear Medium
Low
Extra Low
Air Only
Any load Timed Dry Nigh 40 Wrinkle
Shield TMt
_ Use to dry items to a damp level for itemsthat do
NOTE: Select Air Medium _ not require an entire drying cycle. Select a drying
Only to dry foam, Low temperature based on the type of fabrics in your
rubber, plastic, or Extra Low load. If you are unsure of the temperature to select
heat-sensitive Air Only for a load, select the lower setting rather than the
fabrics, higher setting.
You may select the "With Steam" setting to add a short steam cycle after 60 minutes. This is available only with High and Medium Drying
Temperature settings.
CYCLE GUIDE -- STEAM CYCLE
Settings and options shown in bold are default settings for that cycle.
Not all settings and options are available on each cycle.
Steam cycles are designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics.
Cycle:[ Temperat :DrY "g----]! Defao tT me:
IsteamRe'resh/ OeO,omH0h--! 22
Available ! "_
Options: _ Cycle Details: _
I
Wrinkle Shield'M*_ _ Use to reduce odors and lightwrinkles.
Static Reduce |_ Do not add dryer sheets.
!
, You may select the "With Steam" setting to add a short steam cycle after 60 minutes. This is available only with High and Medium Drying
Temperature settings.
Load Size Recommendations
For best results, follow the load size recommendations noted
for each cycle.
@ mall load: Fill the dryer drum with 3-4 items,
not more than 1/4 full.
_ IVledium load: Fill the dryer drum up to about 1/2 full.
Large load: Fill the dryer drum up to about 3/4 full.
Do not overload. Items need to tumble freely.
9