Error Messages - Sony HDWM2000/20 Operation Manual

11-3 Error Messages

This unit is equipped with a self-diagnosis function,
and if a problem is detected, displays an error message
in the time data display and on the monitor.
If an error message appears, contact your Sony service
representative.
Indications in the time data display
If a problem is detected, the ALARM indicator in the
lower control panel lights, and an error message and
error code appear in time data display area 1.
Z
Time data display area 1
Indications on the monitor
The error message and code also appear superimposed
on a monitor connected to the COMPOSITE VIDEO
OUTPUT 3 (SUPER) connector, HDSDI OUTPUT 3
(SUPER) connector, or SDI OUTPUT 3 (SUPER)
connector. Depending on the error code, an indication
of the source of the problem may appear as a
secondary error message.
ERROR-01
REEL TROUBLE-1
11-2
Chapter 11 Maintenance and Inspection
Error message displays
• To display error messages and codes superimposed
• Some error messages have no associated error codes.
• Error messages with error codes are saved in non-
• In some cases the error message is slightly different
ALARM indicator
on the monitor, set the CHARA in function menu
page 4 to ON.
In this case, they appear in the time data display.
volatile memory as an error log.
on the monitor and in the time data display.