Sony HDWM2000/20 Operation Manual page 101

Page 2
Item Setting
F1 (V.PROC) Selects the control method for the internal digital video processor.
LOCAL: Change the settings of the internal digital video processor by using this function menu.
REMOTE: Use the optional BVR-50/50P Remote Control Unit to control the internal digital video
processor.
MENU: Change the settings of the internal digital video processor by using F5 (MENU) of the HOME page.
Note
When controlling the unit from the HKDV-503/900, set this item to MENU.
F2 (VIDEO) Sets the HD/SD video signal output level (–∞ to +3 dB).
PRESET: Regardless of manually set values, the video signal is set to the standard level.
Manual setting: With the displayed setting flashing, you can rotate the MULTI CONTROL knob to adjust
the value for the video signal output level.
F3 (CHROMA) Sets the HD/SD chroma signal output level (–∞ to +3 dB).
PRESET: Regardless of manually set values, the chroma signal is set to the standard level.
Manual setting: With the displayed setting flashing, you can rotate the MULTI CONTROL knob to adjust
the value for the chroma signal output level.
Sets the color phase (phase relative to burst)
F4 (HUE)
(59.94i, 29.97PsF
PRESET: Regardless of manually set values, sets the color phase to the standard value.
mode)/(C PHAS)
Manual setting: With the displayed setting flashing, you can rotate the MULTI CONTROL knob to adjust
(50i, 25PsF,
the value across the range ±30°.
23.98PsF, 24PsF
mode)
F5 (SETUP) Sets the setup level (59.94i, 29.97PsF mode) or black level (50i, 25PsF, 23.98PsF, 24PsF mode)
(59.94i, 29.97PsF
PRESET: Regardless of manually set values, the level is set to the standard value.
mode)/(BLACK)
Manual setting: With the displayed setting flashing, you can rotate the MULTI CONTROL knob to adjust
(50i, 25PsF,
the setup level across the range ±30 IRE (59.94i, 29.97PsF mode) or to adjust the black level across
23.98PsF, 24PsF
the range ±210 mV (50i, 25PsF, 23.98PsF, 24PsF mode).
mode)
F6 (YC DLY) Sets amount of Y/C delay for playback of analog Betacam tapes.
PRESET : Regardless of manually set values, the Y/C delay is set to the standard value.
Manual setting: With the displayed setting flashing, you can rotate the MULTI CONTROL knob to adjust
the Y/C delay across the range ±100 ns.
9-5
Chapter 9 Function Menu