Kenmore 796.3151 Use & Care Manual page 21

Top-loading
Table of Contents

Advertisement

Available languages

Available languages

OPTION
BUTTONS
Your washing machine features several additional cycle
options that customize cycles to meet your individual needs.
@
Turn ON the washer and turn the cycle selector knob to
select the desired cycle. If the cycle selection is changed
after the options have been selected, all settings will be
changed to the default settings for the new cycle.
Use the cycle modifier buttons to adjust the settings for
that cycle.
Pressthe cycle option button(s) for the option(s) you
would like to add. The button will light when that option
is selected. If the selected option is not allowed for the
selected cycle, the chime will sound twice to inform alert
you and the LED will not illuminate.
O
ress the START/PAUSE button to start the cycle. After a
brief delay, the lid will lock and the cycle will begin.
NOTE:
To
protect
your
garments_
not
every
option
is available
with
every cycle.
* If the START/PAUSE
button is not pressed within
four minutes
to start the cycle° the control will shut off and all settings will be
lost.
STAIN BOOST
/_l Use this option to wash loads with
Stain Boost I
multiple types of soils. With this option,
the water temperature
is raised in
three steps to optimize
cleaning
performance.
During
the final wash step, the water is heated
and maintained
at the highest temperature
for that cycle for 10 minutes.
NOTE: Best results are obtained
with smaller loads (tess
than 6 lbs.)
SAVE ENERGY O
[
i]
This°pti°nsavesenergybyusingc°°ler
Save EnergyO
water while increasing the wash and rinse
times to maintain wash performance.
This feature is only available with the NORMAL/CASUAL
and HEAVY DUTY cycles as listed below.
* NORMAL/CASUAL
Hot becomes Cold
° NORMAL/CASUAL
Cold becomes Tap Cold
° HEAVY DUTY
Hot becomes Cold
EXTRA RINSE
I Extra Rinse
This option will add an extra rinse to the
Wo,o_ P,os
selected cycle. Use this option to help
ensure the removal of detergent or
bteach residue from fabrics. Liquid fabric softener, if used,
is always dispensed in the final rinse.
NOTE: You cannot select the EXTRA RINSE option with
the DRAIN & SPIN cycle.
WATER PLUS
Press and hold the EXTRA RINSE
Extra Rinse
button for 3 seconds to activate
Water
Pmus
WATER PLUS. Use this option if you
wish to add more water to your wash load.
ADD A GARMENT
The ADD A GARMENT
light will
Add Ach_meGarment
illuminate
during the earty stage of the
wash cycle to indicate that it is safe
to pause the cycle to add more items. Do not press the
button, as the light is controlled
by the washer. Pressing
the ADD A GARMENT
button will only change the
chime setting.
Once the ADD A GARMENT
light goes out, additional
laundry
should not be added to the load. Doing so may
result in unsatisfactory
performance
because the washer
will not compensate
for the additional
garments.
Do not press the ADD A GARMENT
button. Press the
START/PAUSE button to pause the washer.
Open the lid after it unlocks.
Add your additional
items.
O
CIose the lid.
O
ress the START/PAUSE button. The cycle will resume
after the lid locks.
CHIME
I_
The volume of the chime is adjusted
AGarment
using the ADD A GARMENT
button.
Do
Chime
not press the button to add garments
to a wash load. Press repeatedly
to adjust the volume of
the chime. The chime will sound at the new volume with
each press of the button. When no chime is heard, the
chime is off. The volume settings are LOW - HIGH - OFF.
The chime volume can be adjusted at any time as long as
the washer is turned ON.
21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

796.3121

Table of Contents